UV DTF Decals

TAT 10/14 BD DAYS

1. Prepare the Surface: 

• Clean the surface where you'll be applying the UV DTF transfer with alcohol and let it dry completely. 

• A clean surface is crucial for a strong and professional-looking application. 

2. Position the Transfer: 

• Carefully peel the design transfer off of its backing. 

• Position the transfer on the surface, ensuring the design is straight and in the desired location. 

• The adhesive is strong, so once the transfer touches the surface, it cannot be moved or taken off. 

3. Apply Firm Pressure: 

• Press the transfer down, working from the center outwards to push out any air bubbles. 

• Use a squeegee or your fingers to apply firm pressure and ensure the transfer adheres smoothly. 

4. Remove the Release Film: 

• Once the transfer is firmly adhered, carefully peel off the clear film (release film). 

• You're left with the design permanently adhered to the surface. 

Tips for Success: 

• Practice: If you're new to UV DTF, practice on a test surface first. 

• Cleanliness: A clean surface is essential for a good application. 

• Firm Pressure: Ensure the transfer is firmly adhered to the surface. 

• Remove Bubbles: Work from the center outwards to push out any air bubbles. 

• Consider the substrate: Some substrates may require a specific type of adhesive or preparation.